Rings and things

Here's the ring I broke. There's a lip on it, must have been half in and stick on the lip and my 'gentle' tapping took it off.


Close up of the ring.


South Wales pistons gave me a dodgy set to start - had two top rings and none of the middle one with the step. Had to go back, but the piston is in now.


Had a bit of spare time after putting new big end bolts on and torqueing them down
So I put the front head on and torqued it. It's tight - 25Nm+90degrees+90degrees+90degrees+15degrees. Me arms still hurting.